Ramco Ready Mix Plaster is a premixed readymade render for manual application. It is manufactured specially using high quality raw materials along with hydrophilic substance which ensures the curing chemically and delivers good adhesion properties and sad resistance. The product has been engineered to retain only that much amount of water in the mortar required for the Hydration of cement in the mortar mix.
Mixing
Ramco Self Curing Plaster – contains all ingredients in dry form, only water needs to be added. Mix 7 liters of clean water with dry mortar until a homogeneous smooth mass is reached. If necessary add more water to get the plastic like consistency. Do not mix longer than 5 minutes. Do not use old and hardened mortar.
Surface Preparation
The wall should be dry and clean. In hot weather conditions wet wall before application. Avoid exposure to direct sun and strong wind. If possible start application in shade.
Application
For flat concrete surface use a primer such as cement slurry or a construction adhesive to improve the boding strength. Application up to 20mm can be made in one step without sagging. If you have different types if substrates (like brick / concrete wall / polystyrene sheet) sue fibre mesh or metal net for the joint area to avoid cracks. Before the final coat is applied Ramco RM SCP needs to be hardened ( minimum of 7 days on thickness and weather conditions ). This products can be used for all the internal and extrenal wall applications. Do not apply below 5 C. Minmal thickness 12mm and Maximal thickness in one layer 20mm.
Consumption
Water – 6-7 litres per 40kg bag.
Coverage Area – 1 bag of 40kg – 1.6 to 1.8 SQMT / 18-20 SFT@ 12mm thickness under ideal conditions.
Application
Suitable on all substrate such as bricks, concrete bricks, concrete blocks, AAC etc..
Technical Service
The Ramco Cements Limited- Dry Mix Division Technical Department is available to assist you in the use of our products and services and are entirely at your disposal without any obligation.